InterMapper will not run under this version of System software. InterMapper requires at least System 7.
InterMapper has not been tested on machines which don't have Color QuickDraw. Please report any problems to the developer.
A device named “^1” already exists with the address ^2. (UNUSED)
It doesn't make sense to use the “^1” probe type with an ^2 address.
Failed to open a DDP socket. Make sure AppleTalk is active in the Chooser. (^1)
Your “^2” helper is not configured in Internet Config. (^1)
Can't launch the application because Internet Config reported an error. (^1)
Can't locate the “^3” program configured as your “^2” helper. Please check your Internet Config helper preferences. (^1)
Can't locate the program configured as your “^2” helper. Please check your Internet Config helper preferences. (^1)
The device “^1” cannot be used to start discovery because it is being polled with the “^2” probe type.
InterMapper could not open a DDP socket because an error occurred. (^1)
InterMapper could not open a UDP socket because an error occurred. (^1)
InterMapper could not open an ICMP socket because an error occurred. (^1)
InterMapper could not open a DDP socket because AppleTalk is not active.
InterMapper could not open a UDP socket because IP service is not available (OT or MacTCP.)
InterMapper could not open an ICMP socket because IP service is not available.
A user named “^1” already exists. Please choose a different name.
That user name is invalid. Please choose a different name.
You need to enter a valid e-mail address.
Before you can send e-mail, you need to specify the address of your SMTP server in the preferences dialog.
InterMapper cannot resolve the address of your SMTP server. Please verify that your SMTP server is configured correctly.
Before you can send e-mail, you need to specify the “Sender” field in the preferences dialog. This value will be used in the “From:” line of the e-mail header.
You need to specify an application to send the apple event to.
Can't locate the “^2” application. Please make sure it is available on a mounted disk. (^1)
There is not enough memory to launch “^2”. You may need to quit some open applications to free up memory. (^1)
Can't launch the “^2” application because an error occurred. (^1)
Unable to interpret “^1” as an IP address filter.
InterMapper can't run because its preferences file is already open.
This file appears to be partially damaged. Please use the “Save as...” command to create a new copy of this file. (Error = ^1)
InterMapper requires Open Transport 1.1.1 or later. You can find the latest version of Open Transport at http://www.apple.com.
InterMapper could not open UDP port ^2 because it is already in use. (^1)
There was an error resolving some of the host names or addresses you entered. Devices with valid addresses have been added to the map.
Your evaluation period has expired. You must now quit InterMapper.
This demonstration version does not allow you to save your maps. You must enter a serial number to unlock this feature.
This demonstration version does not allow you to open saved maps. You must enter a serial number to unlock this feature.
This demonstration version does not allow you to print your maps or charts. You must enter a serial number to unlock this feature.
The last operation could not be completed because this software has expired. You must enter a valid serial number to resume operation.
This evaluation version will not open maps created more than 30 days ago. You must purchase the software to open this map.
You have exceeded the limit of ^1 devices permitted for your InterMapper license. Some devices will be added using the “Non-Polling” probe type.
The probe type cannot be changed because you are at the limit of ^1 devices permitted for your InterMapper license.
The file “^1” cannot remain open because you have exceeded the limit of ^2 devices permitted for your InterMapper license.
Your serial number is valid.
Thank you!!
The subnet “^1” could not be added because it already exists.
